Webshop +31 (0)315 76 00 65 Sales@kupan.nl Quick Delivery Easy to Assemble

Ojmar OTS10 Basic – electronic RFID locker lock

Technical specifications ProductOjmar OTS10 (OTS Basic) TypeElectronic RFID locker lock AuthenticationRFID Supported technologyMIFARE® Classic 1K/4K, 4B and 7B UID – ISO/IEC 14443 ReadingUID / Sector Compatible credentialsRFID cards, wristbands, FOBs, Technogym key, stickers and transponders Reading rangeUp to 2 cm when pressing the knob Usage modesFree, dedicated with autocancellation, dedicated without autocancellation and multifunction CommunicationNFC EncryptionAES-256 Power supply4 x AA alkaline batteries (VARTA) Battery lifeUp to 10 years at room temperature, depending on usage and configuration Low battery indicationYes Firmware updateVia NFC Dimensions119.5 x 35 x 118 mm Weight375 g Knob resistance1000 N HousingBlack Protection ratingIP55 Impact protectionIK09 Operating temperature-10 °C to 42 °C (indoor use) Humidity<97%, condensation free Door materialsPhenolic, glass, HPL, melamine and metal* Door thickness<20 mm HandingAvailable left- and right-handed
SKU
190.8050.00011
€106.26
  • Buy 5 for €100.95 each and save 5%
  • Buy 10 for €95.63 each and save 10%
  • Buy 25 for €90.32 each and save 15%
  • Buy 100 for €85.01 each and save 20%
  • Buy 250 for €79.70 each and save 25%

Offerte aanvragen

Snel, eenvoudig en afgestemd op uw wensen!

 

Description

Ojmar OTS10 Basic – electronic RFID locker lock

The Ojmar OTS10 Basic is an electronic locker lock using RFID technology for secure and convenient locking of lockers and cabinets. It replaces a traditional mechanical key and cylinder system and is designed for professional applications such as changing rooms, sports facilities, swimming pools, fitness centres, schools, workplaces and other environments with frequently used lockers.

The lock is operated using a compatible RFID credential, such as an RFID card, wristband, FOB, sticker or transponder. The OTS10 supports MIFARE® Classic 1K/4K and can read UID or sector information depending on its configuration. The RFID credential is presented near the knob and the knob is pressed to operate the lock.

Flexible locker lock configuration

The Ojmar OTS10 Basic is fully configurable by the end customer and supports several operating modes. It can be configured for free use, dedicated use or multifunction operation, allowing the same lock platform to be used for different locker management concepts.

In free mode, one RFID credential can operate up to three locks simultaneously. Dedicated modes with or without autocancellation are also available. Multifunction mode allows the same credential to operate up to three free locks and one dedicated lock.

RFID, NFC and AES-256 encryption

Electronic communication is protected using AES-256 encryption. The lock uses NFC for communication and maintenance, and firmware can be updated via NFC. The lock configuration is retained when the batteries are replaced.

The electronic components, batteries and mechanical locking system are housed inside the lock, protecting the main components from direct access from the outside of the locker.

Long battery life

The OTS10 Basic is powered by 4 AA alkaline batteries. According to Ojmar, battery life is up to 10 years at room temperature, depending on usage and configuration. The system also provides low-battery and battery-change indications.

Suitable for different locker doors

The Ojmar OTS10 Basic can be installed on phenolic, HPL, glass and melamine doors. Installation on metal doors is also possible, although Ojmar specifies that a booster is required. The specified maximum door thickness is less than 20 mm.

The lock is available in both left-handed and right-handed versions, allowing the appropriate model to be selected for the opening direction of the locker door.

Robust design for professional use

The black housing has an IP55 protection rating and an IK09 impact resistance rating. The knob has a specified resistance of 1000 N. The OTS10 Basic is designed for indoor operation at temperatures from -10 °C to 42 °C.

Short Description

Technical specifications

ProductOjmar OTS10 (OTS Basic)
TypeElectronic RFID locker lock
AuthenticationRFID
Supported technologyMIFARE® Classic 1K/4K, 4B and 7B UID – ISO/IEC 14443
ReadingUID / Sector
Compatible credentialsRFID cards, wristbands, FOBs, Technogym key, stickers and transponders
Reading rangeUp to 2 cm when pressing the knob
Usage modesFree, dedicated with autocancellation, dedicated without autocancellation and multifunction
CommunicationNFC
EncryptionAES-256
Power supply4 x AA alkaline batteries (VARTA)
Battery lifeUp to 10 years at room temperature, depending on usage and configuration
Low battery indicationYes
Firmware updateVia NFC
Dimensions119.5 x 35 x 118 mm
Weight375 g
Knob resistance1000 N
HousingBlack
Protection ratingIP55
Impact protectionIK09
Operating temperature-10 °C to 42 °C (indoor use)
Humidity<97%, condensation free
Door materialsPhenolic, glass, HPL, melamine and metal*
Door thickness<20 mm
HandingAvailable left- and right-handed

* A booster is required for metal doors according to Ojmar.

Loading...